Central Air Conditioning Buying Guide
Early spring is a good time to think about replacing your central air conditioner—or installing a whole new system. It can be a huge expense, so you’ll want to get it right.
In this guide, we’ll help you choose the right AC system for your home—and then maintain it, so you can get the unit’s longest life and the best performance possible. We’ll also share some tips on how to find a good heating, ventilating, and air conditioning (HVAC) technician to do the work.
Consumer Reports members can see our ratings for the most reliable ducted AC brands, based on survey data we’ve collected on more than 18,000 AC units in real-world use, bought and installed between 2007 and 2022. Based on what we’ve found in our survey, we predict that about 25 percent of central AC systems will encounter problems in the first eight years of ownership, so it can pay to pick a brand that’s more reliable. (Through our survey, we also learned which brands owners tend to be most satisfied with, the costs of repairs, and which parts break most often.)
We don’t have performance ratings for central air conditioning systems. It’s not practical for Consumer Reports to test them because there are so many variables, including a home’s size and design, how the system is installed, and the construction of the ductwork.
What's New With Central Air Conditioning
If you’re buying a new central AC for the first time in a while (most AC units last at least a decade), you’ll find that today’s models are more energy-efficient, which means they cost less to run while keeping you cool and comfortable.
Ductless air conditioners are also more common and affordable than they were a decade ago. These can be a great option if you’re retrofitting a permanent air conditioning system to a house (or a section of a house) that does not already have ductwork. Here’s a little more on the differences between ducted and ductless ACs.
Ducted vs Ductless
Central air conditioning
A true central air conditioning system uses ducts to distribute cooled air throughout the house. In a “split system,” the most common design, refrigerant circulates between an indoor coil and a matching—meaning from the same brand—outdoor condenser with compressor (see the illustration below). The refrigerant cools the air, dehumidifying it in the process; a blower circulates air through ducts throughout the house. A thermostat maintains the temperature at the setting you select.
Split ductless systems
Split ductless systems have an outside condenser and compressor, and one to four or more indoor blower units, called air handlers, mounted high on the wall, that distribute air. The indoor and outdoor sections are connected by a thin conduit that houses the power cable, refrigerant tubing, and a condensate drain. The conduit is run through about a 3-inch hole hidden behind each air handler. Each air handler cools the room in which it’s installed, and you set the temperature with a remote control. Professional installation is recommended. While not technically central air, they’re much quieter and more efficient than window ACs or portable ACs, and can be an easier, more affordable option to install than a true central air system.
Consider a Heat Pump
You can also consider an air-source heat pump in place of an AC-only system. Heat pumps can provide both heating and cooling. In cooling mode, they work exactly like air conditioners. And come colder weather, they’re the most energy-efficient system for home heating.
They’ve been common in warm parts of the U.S. for decades, but now there are plenty of air-source heat pumps that can provide most or all of a home’s heating needs, even in cold climates. You can also use a heat pump in combination with an existing or supplementary heating system. An installer can set it up so that the heat pump operates most of the time, but then when the outdoor temperature drops below a certain threshold and the heat pump becomes less practical, another system—such as a gas-fired furnace—will kick in. (A guideline for that threshold is about 20° F, but the cutoff can be a little warmer or much colder depending on the system.)
Heat pumps are available in ducted or ductless versions. (Some so-called ductless air conditioners are actually heat pumps.) They tend to cost a little more than AC-only units but less than the combined cost of a new heating and cooling system. Because heat pumps are so energy-efficient, some state governments offer tax incentives or even direct cash rebates to homeowners who install air-source heat pumps, which sometimes make them the lowest-cost option for home heating and cooling. Read our heat pump buying guide for more.
How an Air Conditioner Works
To provide cooling throughout the home, an air conditioner transfers heat from a home’s interior to the outdoors.
Keep Your Ducts in a Row
If you are installing an AC system from scratch, your contractor should calculate the size of the cooling equipment you need using recognized methods, such as those you’ll find in the Residential Load Calculation Manual, aka Manual J, from the Air Conditioning Contractors of America (ACCA).
If your home already has ductwork but you’re installing your first AC system, keep in mind that ducts used for heating might not be the right size or in the right location for optimal cooling. Your contractor should ensure that duct sections are properly sized and that there are enough supply registers to deliver sufficient air to the right spots. Undersized ductwork can lead to inefficient and noisy operation.
Also, it’s wise to make sure your ducts are sealed and insulated. Otherwise, air can escape, wasting 20 to 30 percent of the energy used to run your system. Sealing your ducts will keep you cooler in the summer and warmer in the winter.
Important Factors for Choosing Central AC
Size, aka Capacity
A synonym for the air conditioner’s cooling capacity, size is measured in British thermal units per hour (Btu/hr.) or in “tons.” One ton of cooling equals 12,000 Btu/hr. For rough sizing guidance, check the Energy Star website. But the best option is to have your contractor do a load calculation based on a recognized method, such as one in Manual J from the ACCA.
It’s important to pick the right AC capacity for the size of your home. A unit that’s too small will struggle to keep your home comfortable. An oversized unit will cost you more to purchase, and (unless it’s a model with a variable-speed compressor) will cycle on and off more often than it should, stressing the components and struggling to control the humidity in your home.
If you’re replacing your central air, you should look into whether you really need the same size system as your old unit or if you can shrink it a bit. Any changes you’ve made to improve your home’s energy efficiency, such as upgrading your windows or adding insulation, can reduce your cooling needs. On the other hand, if you’ve added rooms, you might need more cooling.
This describes how much cooling the unit delivers for each watt of electricity. Efficiency is expressed as the seasonal energy-efficiency rating, or SEER. The higher the SEER, the greater the efficiency. Higher-SEER ACs tend to cost more, but they’ll often pay for themselves over time through lower energy costs. The minimum SEER allowed for a new split system central air conditioner in the U.S. today is 14, which is at least 20 percent more efficient than minimum-efficiency models made even 10 years ago. Systems that meet the Energy Star guidelines for efficiency have a minimum SEER of 15. The most efficient models reach a SEER of 26.
According to our reader survey, quiet operation is the feature that’s the best predictor for an owner’s overall satisfaction with their air conditioner. Manufacturers publish the noise levels for their products across a variety of outdoor temperatures and fan speeds, measured in decibels. A lower rating is better, especially if the AC will be installed near a bedroom window.
Reliability is the second-best predictor for an owner’s overall satisfaction with an air conditioner (tied with how quickly it cools a room, though that has more to do with whether the AC is sized correctly for your home and whether it’s maintained properly). Consumer Reports members can see the predicted reliability ratings for 23 brands of central air conditioners, based on data that members have shared about the AC units they bought and installed in their own homes between 2007 and 2022.
What to Know About Central AC Maintenance
Central AC systems need regular maintenance for optimal performance. When arranging your installation, it’s worth negotiating a service plan that combines regular inspections with discounts on repairs and a labor warranty into the overall price. Prices for such a service can vary widely.
Here’s what you’ll want the service technician to handle: Once a year, have them clean and flush the coils, drain the pan and drainage system, and vacuum the blower compartments. The contractor should also check to make sure that the system is properly charged with refrigerant, that there are no leaks, and that all mechanical components are working properly.
You can also handle some of the maintenance on your own. Clean grilles and filters monthly. Clear debris and dirt from condenser coils and check for blockages in the drainpipe. Follow the AC manufacturer’s recommendations for changing the filter as well as the filter manufacturer’s recommendations for how often you should change the filter. In general, the thicker the disposable filter, the less often it needs to be changed. (The HVAC filters we test last between three and 12 months.)
If your HVAC system was installed before 2010, it may rely on the refrigerant Freon, a trademark name for several different refrigerants including chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons such as HCFC-22 (or R-22). These chemicals deplete protective ozone from the atmosphere. The Environmental Protection Agency phased out CFCs in the 1990s and HCFCs in 2020. If you still have a system that uses HCFC, you aren’t required to replace it now. It’s only an environmental threat when it leaks, so ask your technician to check for leaks during your annual maintenance visit. Better yet, consider replacing your AC system with a newer one. It will not only be better for the environment but more energy-efficient as well.
Other Details to Consider
Programmable thermostats. Setting your smart or programmable thermostat at the right temperature can reduce your cooling costs by about 10 percent. The right temperature depends on your comfort level, but start by setting it at 78° F and experiment until you find the sweet spot. You’ll save about 3 percent on your utility bill for every degree you raise the set temperature for your central air, according to the Department of Energy. And keep in mind that using a box or ceiling fan, which costs little to run, can make you feel 3° F to 4° F cooler.
Outdoor space. The compressor needs adequate airflow to operate correctly, so make sure to keep at least 2 to 3 feet of space between the unit and any plants or structures. There should also be 5 feet of clearance between the top of the unit and any trees above. You’ll also want to make sure there’s enough space for you or a technician to access and service the unit. And your local building codes might have regulations about how close an outdoor compressor is allowed to be to a neighbor’s window or property line.
Find the Right Contractor
Whether you’re replacing an older air conditioner or installing one for the first time, finding a trustworthy contractor to install and service the air conditioning system matters the most. Here’s what to do.
Ask around. Seek referrals from neighbors, family, or business associates. It’s wise to get price quotes from at least three contractors.
Check their background. Contractors who bid on your installation should show you verification of bonding and insurance, plus any required contractor’s licenses. Check with your local Better Business Bureau and consumer affairs office for complaint records. It’s a plus if technicians are certified by a trade organization, such as North American Technician Excellence or HVAC Excellence, to service residential heating and cooling equipment. Those and similar programs assess the technician’s knowledge of specific types of equipment and their proper service methods.
Get specifics. Contractors who bid on your job should calculate the required cooling capacity using a recognized method, such as one found in the ACCA’s Residential Load Calculation Manual, also called Manual J. An additional reference for assessing ductwork needs is Manual D. The calculations produce a detailed, room-by-room analysis of cooling needs. Ask for a printout of all calculations and assumptions, including ductwork design. Be wary of a contractor who bases estimates merely on house size or vague rules.